VT300 Vehicle Telematics
The VT200 integrates LTE, GNSS, gyroscope, and inertial sensors, supporting multitasking capabilities for real-time and accurate vehicle positioning, mileage recording, and monitoring of incidents like sudden braking, acceleration, and collisions to ensure transportation safety. It locally records and analyzes driving behavior.
The VT200 operates reliably in harsh environments and offers multiple I/O interfaces for remote monitoring of various vehicle peripherals such as alarms, sensors, switches, ignition status, and controllers. With support for standard vehicle protocols like OBD-II and J1939, the VT200 tracks vehicle operations and provides preventive maintenance. Fleet managers can rely on the VT200 for precise and efficient fleet tracking, management, and asset monitoring.
The VT200 is available with LTE CAT M1 and CAT 1, offering continuous and power-saving connectivty.
AWS, Azure, Wialon, ThingsBoard, MQTT Cloud, private clouds
| Model | VT200-LQ00 | ||||
| Network | |||||
| Network Type | LTE Cat 1 | ||||
| Antenna | |||||
| LTE Antenna | Built-in ceramic antenna / External SMA | ||||
| GNSS Antenna | Built-in ceramic antenna / External SMA | ||||
| GNSS | |||||
| Supported Systems | GPS Galileo Beidou GLONASS | ||||
| No. of Channels | 72 channels | ||||
| Sensitivity | -164 dBm, initial positioning time 26s | ||||
| Tracking Sensitivity | -156 dBm (Hot start); -147 dBm (Cold start) | ||||
| Location Accuracy | 2.5m (CEP50) | ||||
| Update Frequency | 10 MHz | ||||
| Built-in Gyroscope | |||||
| Acceleration | Measurement range: ±2 / ±4 / ±8 / ±16g | ||||
| Angular Velocity | Measurement range: ±125 / ±250 / ±500 / ±1000 / ±2000dps | ||||
| Electrical Features | |||||
| Operating Temperature | 9~36 VDC | ||||
| Operating Environment | |||||
| Operating Temperature | -20°C ~ 60°C | ||||
| Storage Temperature | -40°C ~ 85°C | ||||
| Humidity | 95% RH @ 50 °C non-condensing | ||||
| ESD | IEC 61000-4-2 (4KV test) | ||||
| Protection Rating | IP40 | ||||
| Battery | |||||
| Operating Temperature | -30 °C ~ 70 °C | ||||
| Storage Temperature | -20°C ~ 35°C | ||||
| Mechanical Features | |||||
| Shell Material | ABS+PC | ||||
| Dimensions | 98.6 x 62 x 23.5 mm built-in antenna model or 108.3 x 62 x 23.5 mm external antenna model | ||||
| Vehicle Interface | |||||
| CAN bus | 1 channels | ||||
| I/O | |||||
| Ignition Signal (ACC) | 1 channel | ||||
| DI / AI | 4 DI / 4AI | ||||
| DO | 2-channels (max. 300 mA) | ||||
| 1-Wire | 1 channel | ||||
| Serial Port | RS232, RS485 | ||||
| Configuration Interface | |||||
| USB 2.0 | Type-C | ||||
| Software Serivice | |||||
| Cloud platform | AWS IoT, Azure IoT, Wialon, Traccar, GPSWox, WhiteLable Tracking, Thingsboard, Customer platform | ||||
| Transport protocol | TCP, UDP, HTTP, MQTT | ||||
| Vehicle Data | OBDII, J1939 | ||||
| RS232/RS485 | Transparent transmission, Modbus | ||||
| Event Alarm | Collision detection, motion detection, overspeed alert, IO status change, ignition signal detection, etc. | ||||
| Alarm through SMS or FlexAPI over TCP/UDP/MQTT | |||||
| ELD | Forward vehicle data via BLE | ||||
| Other Interfaces | |||||
| SIM slot | 4FF (Single SIM card) | ||||
| LED Indicators | 2 LED cellular status, GNSS status | ||||
| Certification | FCC, IC, PTCRB | ||||
| Model | Cellular Type | Antenna/ Battery | Region |
| VT200-FQ33 | LTE Cat1 LTE-FDD B2/B4/B5/B12/B13 WCDMA B2/B4/B5 | Built-in/ None | North America |
| VT200-FQ33-BAT | LTE Cat1 LTE-FDD B2/B4/B5/B12/B13 WCDMA B2/B4/B5 | Built-in/ 1000 mAh | North America |
| VT200-FQ33-ANT | LTE Cat1 LTE-FDD B2/B4/B5/B12/B13 WCDMA B2/B4/B5 | External/ None | North America |
| VT200-FQ33-ANT-BAT | LTE Cat1 LTE-FDD B2/B4/B5/B12/B13 WCDMA B2/B4/B5 | External/ 1000 mAh | North America |
| VT200-FQ02 | LTE Cat M1 | Built-in/ None | Global |
| VT200-FQ02-BAT | LTE Cat M1 | Built-in/ 1000 mAh | Global |
| VT200-FQ02-ATN | LTE Cat M1 | External/ None | Global |
| VT200-FQ02-BAT-ANT | LTE Cat M1 | External/ 1000 mAh | Global |
| Cable | Order Code | Diagram | Specifications |
| 20 PIN Cable | SCAB000381 |  | The cable has P1 and P2 ends: P1 is 20PIN female, connected to VT200; P2 is open end, AWG24 for other signals, and the connector HX30002-20. |
| OBD 16PIN Test Cable | SCAB000399 |  | OBD 16PIN interface test line,Cable standard UL2464,wire length 1500mm. |
| J1939 6PIN Test Cable | SCAB000409 |  | J1939 6PIN interface test line,Cable standard UL2464, wire length 1500mm. |
